Zinc Based Anti-Seize Compound
Meets A-A-59313, Formerly MIL-T-22361
Superseded by Commercial Spec A-A-59313
This zinc based anti-seize thread compound is generally used to prevent seizing during assembly and disassembly of threaded or unthreaded aluminum and aluminum alloy components. It also provides protection to metal surfaces.
Not for use with optical instruments.
This anti-seize compound can be used as a lubricant, sealer, and tapping compound on plastic and metals. The surface need not be cleaned before application unless grit or low quality oil/grease is present. This product reduces assembly friction and increases torque tension by approximately 20%. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchangers, or manifold bolts, or as a gasket release agent.
Note: Products listed are suggestions. The information on this site will not replace your testing and evaluation procedures. Ultimate product selection should be based on your test results and the specific performance requirements.
Available in 8 oz. tube, NSN 8030-00-292-1102
1 lb. can, no NSN
Physical State: Paste
Penetration @ 77°F: 206 typical
Specific Gravity: 1.1
Additive Type: Zinc
Flash Point: 360°F
Service Range: -65°F to 750°F